IUBio GIL .. BIOSCI/Bionet News .. Biosequences .. Software .. FTP

porting SUN-gcg to Linux?

Reinhard Doelz doelz at comp.bioz.unibas.ch
Sat Oct 7 05:18:20 EST 1995


Bent Nagstrup (nagstrup at biobase.dk) wrote:
: Is the gcg-package freeware? Otherwise it might not be so cool...

The GCG package is *NOT* freeware. If you mount any copy you must have a 
license. It might be possible, convincing arguments provided, that license 
agreements can be made with the company to accomodate this special situation
(This is plain speculation, and usual disclaimers apply; I don't work for 
them etc.)

: And, anyway the gcg programs are not worth so much without all the gigabytes
: of databases and very fast cpu's, so I really don't think it would be worth
: the bother to spend some months porting gcg to your '486sx with a 420 MB
: harddrive :)

Disks are getting cheap these days. Missing disk space will only matter 
if you use non-SCSI hardware. CPU's are another issue but you can bare with a 
PC-type of performance if it is for single user entities - You might wait 
for a day or two but you'll make it.  

: But please don't let that stop you: I also use Linux at home and I also
: think it's a neat idea, but maybe not practically possible...

Another approach will be to use Solaris on the PC, and then (theoretically) 
it should work. However, question being, what do you gain? The software will 
continue to evolve and, unless you can convince the provider that they support
your 'port', it will be a looser at the first problem or update  you 
encounter. Do not forget that Fortran on Linux is still fairly young and 
GCG uses F77 at least partially to some extent. Linux is a good system if 
you use software which is either supported or made specifically for Linux.
Given the restricted computational power, I would suggest a low-end 
workstation (for academics , 15k$ should be enough for a 'single 
user' 8GBytedisk/64MByte memory box) and this gets you the clean and smooth 
access to software which is supported, for no porting cost. You want do 
do it yourself, still? Consider your rating of personpower which you would 
apply if you want to get hired by someone. Experience provided, at least 
$200 per hour  is the rate for good specialists. In only 100 hours you'll 
have assembled your workstation - that is less than half a year if you spent 
two hours of your free time each day (Sixpacks and coffee not counted). 

regards
Reinhard 


-- 
 R.Doelz         Klingelbergstr.70| Tel. x41 61 267 2247  Fax x41 61 267 2078|
 BioComputing        CH 4056 Basel| electronic Mail    doelz at ubaclu.unibas.ch|
 Biozentrum der Universitaet Basel|-------------- Switzerland ---------------|
<a href=http://beta.embnet.unibas.ch/>EMBnet Switzerland:info at ch.embnet.org</a> 




More information about the Bio-soft mailing list

Send comments to us at archive@iubioarchive.bio.net